In this Section you may find the info about Q8Marine products.
Product Data Sheets contain Applications and Technical Caracteristics.
MSDS have well detailed info, in line with the always updated legislation, needed for a correct product handling.
Consulta il depliant dei prodottti Q8Marine.
Select a categories:
-
Q8 MARINE T 50 XL 40
Very alkaline high performance Trunk Piston Engine Oil for modern medium speed Four stroke characterized by a viscosity SAE 40 and a TBN 50 mg KOH/g.
-
Q8 MARINE T 40 XL 40
High performance Trunk Piston Engine Oil for modern medium speed Four stroke characterized by a viscosity SAE 40 and a TBN 40 mg KOH/g.
-
Q8 MARINE T 30 DP 30
High performance Trunk Piston Engine Oil for modern medium speed Four stroke Marine Diesel Engines. This oil is characterized by a TBN 30 mg KOH/g and a viscosity grade SAE 30.
-
Q8 MARINE T 30 DP 40
High performance Trunk Piston Engine Oil for modern medium speed Four stroke Marine Diesel Engines. This oil is characterized by a TBN 30 mg KOH/g and a viscosity grade SAE 40.
-
Q8 MARINE D 1030
Q8 Marine D1000 Series can be used in highly rated medium speed Trunk Piston Diesel Engines. This oil is characterized by a TBN 12 mg KOH/g and a viscosity grade SAE 30.
-
Q8 MARINE D 1040
Q8 Marine D1000 Series can be used in highly rated medium speed Trunk Piston Diesel Engines. This oil is characterized by a TBN 12 mg KOH/g and a viscosity grade SAE 40.
-
Q8 T 750
-
Q8 T 520
-
Q8 OUTBOARD 4T
-
Q8 OUTBOARD SYNT 3
-
Q8 MARINE T 70 HT
Very high performances Marine Cylinder Lubricant (MCL) characterized by a viscosity SAE 50 and a TBN of 70 mg KOH/g.
-
Q8 MARINE T 55 HT
Intermediate base number Marine Cylinder Lubricant (MCL) characterized by a viscosity SAE 50 and a TBN of 55 mg KOH/g.
-
Q8 MARINE HT 40 LS
High performance Marine Cylinder Lubricant (MCL) characterized by TBN 40 and viscosity grade SAE 50.
-
Q8 MARINE V 830
High quality System Oil (SO) designed for lubrication of modern highly rated low speed Two Stroke crosshead Marine Diesel Engines. This oil is available in viscosity grade SAE 30 with a TBN 6 mgKOH/g
-
Q8 OUTBOARD 2T
-
Q8 EL GRECO
Synthetic Lubricants (PAO) with Extreme Pressure Additives for industrial gears and circulating systems.
-
Q8 GOYA
Paraffinic mineral oils series with Extreme Pressure Additives for industrial gears and circulation systems.
-
Q8 HOLBEIN HP SE 46 BIO
-
Q8 HANDEL
High viscosity index mineral oil for hydraulic naval (and highway) equipment exposed to wide temperature variations.
-
Q8 HELLER
-
Q8 HAYDN
-
Q8 VERDI
-
Q8 SCHUMANN
Synthetic Lubricants (PAO) for the lubrication of Air Compressors, Hydraulic systems and not loaded gears. It is suitable for the lubrication of turbochargers bearings.
-
Q8 SCHUBERT
Paraffinic mineral oils series specially developed for the lubrication of Air Compressors with a particular anti oxidant, anti wear, anti rust and anti foam additivities
-
Q8 SCARLATTI
-
Q8 VAN GOGH
Paraffinic mineral oils series specially developed for the lubrication of Steam Turbines and Gas Turbines.
-
Q8 SUPERCOMPRESSOR 100
-
Q8 STRAVINSKY
Naphthenic mineral oil developed for the lubrication of chiller compressor. The use depends on the gas. For the right application please contact our technical service.
-
Q8 REMBRANDT
It’s a multipurpose lithium soap greases series.
-
Q8 REMBRANDT EP
They are multipurpose lithium soap greases with EP additives.
-
Q8 RUBENS
It’s a multipurpose lithium complex soap grease, NLGI 2,5, for industrial and automotive applications. It is suitable in case of high loads and high temperature.
-
Q8 RUBENS HTM
-
Q8 GLUCK S
Warnings
The figures in the Product Data sheets are not a specification. They are typical figures obtained within production tolerances.